ZebraLight SC53c N Neutral White High CRI AA Flashlight

$64.00

  • Beam Type
    • 80 degree spill
    • 12 degree hot spot
  • LED: Nichia 519A-V1
    • Nominal CCT: 4000K
    • Typical CRI: 93
    • Tint deviation: 3-step
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes)
    • High: H1 Lm (hr) or H2 Lm (hr) /  Lm ( hrs) / Lm ( hrs)
    • Medium: M1  Lm ( hrs) or M2 Lm ( hrs) /  Lm ( hrs) /  Lm ( days)
    • Low: L1  Lm ( days) or L2  Lm ( month) / Lm ( months) /  Lm ( months)
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
    • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
  • Operating Voltage Range: 0.7V - 2.0V
  • Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop (Pro) is highly recommended. Batteries are not included in the box.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • 80 degree spill
    • 12 degree hot spot
  • Dimensions
    • Head Diameter: 0.96 inch (23.6 mm)
    • Length: 3inch (77.6 mm)
  • Weight
    • 1.4 oz (40 gram)
  • Features
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • All levels are current regulated
    • Low battery alert (flashing once every 10-20 seconds) when the light is switched OFF
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade aluminum bar stocks
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Corning Gorilla Glass 5
    • Preinstalled bezel down pocket clip
    • Orange peel reflector
    • Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
    • Waterproof to IPX8 (2 meters, 30 minutes)

Related products