SC600F Mk III Plus XHP50 Floody Cool White 18650 Flashlight

SC600F Mk III Plus XHP50 Floody Cool White 18650 Flashlight

$95.00

  • LED: Cree XHP50 Cool White (Typical CRI: 70, Nominal CCT 5700K)

Available on backorder

  • LED: Cree XHP50 Cool White (Typical CRI: 70, Nominal CCT 5700K)
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes)
    • High:         H1 1800 Lm (PID, approx. 2.3 hr)   or    H2  800 Lm (PID, approx. 2.7 hrs) / 515 Lm (PID, approx. 2.9 hrs) / 324 Lm (4.1 hrs)
    • Medium:    M1 120 Lm (12.5 hrs)    or    M2   41 Lm (36 hrs) / 23 Lm (2.6 days) / 12.5 Lm (4.6 days)
    • Low:         L1   3.5 Lm (15.5 days)   or    L2   0.91 Lm (1.9 months) / 0.44 Lm (2.7 months) / 0.22 Lm (4 months)
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
    • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Sanyo NCR18650GA batteries. Runtimes of the three PID controlled levels (1800, 800 and 515 Lumen) vary greatly with ambient temperature and air circulation.
  • Operating Voltage Range: 2.7V - 6.0V
  • Battery: One 18650 size (i.e. unprotected 65.0-65.2mm long) 3.6V-4.35V li-ion rechargeable. Batteries are not included in the package.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • Floody beam from frosted lens, with 90 degree beam spread
  • Dimensions
    • Head Diameter: 1.2 inch (30 mm)
    • Body Diameter: 0.98 inch (25 mm)
    • Length: 3.8 inch (96 mm)
  • Weight
    • 2.26 oz (64 gram) without battery
  • Features
    • PID thermal regulated outputs (three highest output levels) using 384 internal brightness levels and a calibrated 0.1C resolution temperature sensor
    • Programmable PID thermal regulation temperature target value
    • Built in battery protections with continuously monitored temperature, current, and voltage, plus a (2.7V) low voltage cutoff
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade aluminum bar stocks
    • Proprietary heat sinking design
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Tempered optical grade glass
    • Battery reverse polarity protection
    • Pocket clip
    • Lanyard ring
    • Waterproof to IPX8 (2 meters, 30 minutes)

Related products