Zebra H503c AA Headlamp

$57.00

Neutral White High CRI – Flood, with 120 degree beam spread

  • LED: Samsung LH351D
    • Nominal CCT: 4000K
    • CRI: 90+
    • Tint deviation: 3-Step
  • User Selectable Levels: 3 main levels (High, Medium and Low). Each main level can be programmed to one of its two sub-levels. The second sub-level of the each main levels can be further programmed to different brightness levels.
  • Light Output (runtimes)
    • High: H1 264 Lm (0.9 hr) or H2 220 Lm (1.6 hr) /158 Lm (2.3 hrs) /97 Lm (4.2 hrs)
    • Medium: M1 52 Lm (8.5 hrs) or M2 24 Lm (21 hrs) /9.6 Lm (41 hrs) /3.3 Lm (4.5 days)
    • Low: L1 1.0 Lm (13 days) or L2 0.25 Lm (1.1 month) /0.06 Lm (2.2 months) /0.01 Lm (3.3 months)
    • Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
    • Light output are ANSI out the front (OTF) values. Runtimes tested (and parasitic drain estimated) using Panasonic Eneloop Pro AA batteries. Remaining battery power, about 10-20%, after step-down are not counted towards the runtimes.
  • Operating Voltage Range: 0.7V - 2.0V
  • Battery: One AA size NiMH, lithium or alkaline battery. Panasonic Eneloop or Eneloop Pro is highly recommended. Batteries are not included in the box.
  • Parasitic Drain: Negligible (much less than the self discharging of a battery)
  • Beam Type
    • Flood, with 120 degree beam spread
  • Dimensions
    • Head Diameter: 0.86 inch (21.8 mm)
    • Length: 2.76 inch (70.1 mm)
  • Weight
    • 1 oz (29 gram)
    • 2 oz (55 gram) with an Eneloop AA battery
    • 2.8 oz (78 gram) with an Eneloop AA battery and headband
  • Features
    • Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to start)
    • All levels are current regulated
    • Automatic stepping down from High to Medium, and from Medium to Low when battery capacity is low
    • Durable electronic soft-touch switch
    • Smart user interface provides fast and easy access to all brightness levels and beacon-strobes.
    • Precision machined unibody casing from premium grade aluminum bar stocks
    • Proprietary heat sinking design bonds the LED board directly to the unibody aluminum casing
    • Durable natural hard anodized finish (Type III Class I)
    • Sealed and potted LED driver circuitry
    • Battery reverse polarity protection
    • Tempered optical grade glass
    • Battery power can be disconnected by slightly unscrewing the tailcap to prevent unwanted activations or parasitic drain
    • Waterproof to IPX8 (2 meters, 30 minutes)

Related products