CAMP – TURBOHAND PRO Ascender

The Turbohand Pro ascender is the absolute top of the line for maximizing efficiency
while ascending ropes. It features a roller which not only helps with climbing
efficiency by making the upward glide much smoother, but also reduces dangerous
wear and tear on the device where the rope tends to rub on the body of a traditional
ascender. The removable rope guide at the bottom of the handle optimally aligns the
rope for long ascents.
The ergonomic rubber handle extends into the upper part of the spine to allow for
a double-handed grip. The handle and the rope are aligned on the same plane for
the best handling and efficiency. Features three large attachment points, two on the
bottom and one at the top, for optimal organization. The stainless steel rope guide
reinforces the main attachment point for increased resistance to wear and tear. It also
prevents the carabiner from interfering with the rope.
The robust body is constructed from 3.5 mm aluminum alloy and the toothed cam is
finished with a special anti-wear treatment and features drain holes to help prevent
the build-up of mud and grit. The opening system is protected on both sides to
prevent accidental openings.
The roller also allows the Turbohand to be rigged as a locking pulley for light hauling
with a max load of 50 kg, 110 lbs. NOTE: This configuration is not intended for hauling
or securing of bodies.